Skip to main content

Find audio gear that fits your vehicle

Rockford Fosgate P300X2 — 2-channel amplifier

Rockford Fosgate P300X2 — 2-channel amplifier

Rockford Fosgate

In stock

$279.99

Highlights

  • Speaker Size 300x2"
  • Impedance 4 ohm
  • Sensitivity 12 dB
SKU:
P300X2
Adding to cart… The item has been added

Every order includes

  • A vehicle-specific install guide
  • Free lifetime tech support
  • The harness or adapter your vehicle needs, listed in the fit box above
  • 60-day returns

Questions? Talk to a Velocity advisor

3435434534

Specifications

Specifications

Speaker Size
300x2"
Impedance
4 ohm
Sensitivity
12 dB
Amplifier Channels
2
Amplifier Class
Class A

About the Rockford Fosgate P300X2 — 2-channel amplifier

From the manufacturer

Rockford Fosgate Punch 300 Watt 2-Channel Amplifier The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers. The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system. High level input capable with Auto Turn-On circuit RCA pass-thru outputs Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) 12dB/octave Butterworth crossover On-board Punch EQ with +18dB boost @ 45Hz Muted turn on Stealth top mounted control panel Cast aluminum heatsink Short circuit protection Over current protection 1 Year Warranty General Specifications CEA-2006 Compliant CEA-2006 Power Rating100W x 2 @ 4Ω≤1.0% THD+N Cta-2006 Compliant Number of Channels 2 Total Power (Sum of Rated Power) 300 Watts Rated Power (RMS Continuous Power) 100 Watts x 2 @ 4-Ohm 150 Watts x 2 @ 2-Ohm 300 Watts x 1 @ 4-Ohm Bridged Dynamic Power (PVC/PowerCube®) 120 Watts x 2 @ 4-Ohms 0° Res 203 Watts x 2 @ 2-Ohms 0° Res Bridgeable Yes Frequency Response 20Hz-20kHz Input Sensitivity 150 mV - 12 V Circuit Topology Class Class A/B Efficiency (average) 69% @ 4-Ohm Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0% 2-Ohm: <1.0% Signal Input Hi/Low Level: 1 RCA Pair Signal Output Low Level: 1 RCA Pair Tone Controls 0dB to +14dB @ 12.5kHz 0dB to +18dB @ 45Hz Crossover Controls High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth All-Pass: Yes Remote Controls Optional Punch Level Control (PLC2) Ready Visual Indicators Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend:1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD Power Wire Gauge 8 AWG to 4 AWG Power Input Connector Captive C-Clamp Speaker Wire Gauge 8 AWG to 18 AWG Speaker Output Connector Captive C-Clamp Cooling Convection Heatsink Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 50 A Average Current Draw (13.8V Music) 23 A Max. Current Draw (13.8V Sinewave) 45 A Suggested Alternator 75 A Dimensional Diagram Dimensions (H x W x D) 2.38 x 7.76 x 9.86 (in) 6.05 x 19.71 x 25.04 (cm) Shipping Weight 9.5 Lbs. (4.3 Kg.)

Write a Review

Frequently compared

Match the numbers to your setup

The specs above are the fastest way to confirm a part is right before checkout — a size or power rating just outside your factory setup usually means an adapter or a different SKU, not a return later. If you are not sure which spec matters for your vehicle, the fit tool at the top of the page narrows the catalog to parts already confirmed for your year, make, and model.

!