Skip to main content

Find audio gear that fits your vehicle

MTX Audio JH7005 — 5-channel Class D amplifier

MTX

In stock

MSRP: $549.95
$229.99
(You save $319.96)

Highlights

  • Impedance 2 ohm
  • Sensitivity 60 dB
  • Amplifier Channels 1 (mono)
SKU:
JH7005
Adding to cart… The item has been added

Every order includes

  • A vehicle-specific install guide
  • Free lifetime tech support
  • The harness or adapter your vehicle needs, listed in the fit box above
  • 60-day returns

Questions? Talk to a Velocity advisor

Specifications

Specifications

Impedance
2 ohm
Sensitivity
60 dB
Amplifier Channels
1 (mono)
Amplifier Class
Class D

About the MTX Audio JH7005 — 5-channel Class D amplifier

From the manufacturer

MTX JH7005 Jackhammer Series 700 Watt Five Channel Full System Amplifier Easy Access Controls The JH7005 is fully loaded and ready to drive an entire system. The top panel includes controls for both full range speakers, gain, crossover and frequency adjustment, as well as controls for the subwoofer output including fully adjustable gain, low pass filter, subsonic filter and bass boost. Only What You Need The JH7005 has the functionality to power a complete system including full range speakers and subwoofer(s). The input section features high quality RCAs (front, rear, sub) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The unit can also be used in either 5-channel, 4-channel or 2-channel modes depending on the Input Mode selection. High Quality Power and Speaker Connections The JH7005 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer. FEATURES • All-In-One System Design • Top Mount Controls • Variable Crossovers • Selectable Turn On Input • Selectable Input Signal • Variable Subsonic Filter • Remote Bass Knob SPECIFICATIONS • Description: 5-Channel • Topology: Class AB + D • 4Ω RMS Power Output: 60W X 4 Channel, 275W x 1 Channel • 4Ω Bridged: 180W x 2 Channel • 2Ω RMS Power Output: 90W x 4 Channel, 450W x 1 Channel • THD: Less Than 1% • Signal to Noise Ratio: 60dB • Frequency Response: 20Hz to 20kHz (4 channels), 20Hz - 250Hz (subwoofer) • Crossover: 40Hz to 250Hz, 12dB/Oct • High Pass Filter: 40Hz to 250Hz, 12dB/Oct • Subsonic Filter: 20Hz to 50Hz, 12dB/Oct • Bass Boost: 0 - 12dB @ 45Hz • Maximum Input Signal: 10V • Height: 2.57" (65.2mm) • Width: 7.61" (193.4mm) • Depth: 15.47" (393mm)

Write a Review

Frequently compared

Match the numbers to your setup

The specs above are the fastest way to confirm a part is right before checkout — a size or power rating just outside your factory setup usually means an adapter or a different SKU, not a return later. If you are not sure which spec matters for your vehicle, the fit tool at the top of the page narrows the catalog to parts already confirmed for your year, make, and model.