Skip to main content

Find audio gear that fits your vehicle

Mosconi PICO 4 SA — 4-channel Class D amplifier

Mosconi PICO 4 SA — 4-channel Class D amplifier

Mosconi Gladen

In stock

MSRP: $1,070.00
$649.00
(You save $421.00)

Highlights

  • Speaker Size 4x90"
  • Impedance 4 ohm
  • RMS Power 90W
SKU:
PICO-4-SA
Adding to cart… The item has been added

Every order includes

  • A vehicle-specific install guide
  • Free lifetime tech support
  • The harness or adapter your vehicle needs, listed in the fit box above
  • 60-day returns

Questions? Talk to a Velocity advisor

3435434534

Specifications

Specifications

Speaker Size
4x90"
Impedance
4 ohm
RMS Power
90W
Sensitivity
29 dB
Amplifier Channels
4
Amplifier Class
Class D

About the Mosconi PICO 4 SA — 4-channel Class D amplifier

From the manufacturer

4 -Channel Class D Amplifier: 4 X 90w / Crossover For Semiactive Speaker Features: • High efficiency amplifier with 4 x 90 Wrms / 4 Ohm output power. • Fully bridgeable and 2 ohm stable, inputs high and low level. • Load resistor and ground lift selectable via jumpers, switchable active crossovers. • Ideal for use in smart OEM projects, or with the EXT4link patch cable as a supplement to a PICO 8|12 DSP. Specifications: • DC-DC converter typology: Unregulated • Conversion frequency: 45 KHz (± 6 %) • Absolute maximum operation supply voltage range: 10 V ÷ 16 V • Recommended operation supply voltage range: 10 V ÷ 14.4 V • Power-on/Power-off Voltage Threshold: 9.5 V / 6.5 V • Mute delay time: 3 secs • Secondary voltages (Rail / Service): ±34.4 V / ±14.8 V • Max output offset voltage (each channel): ±150 mV • Standby current: < 0.1 mA (typical) • Idle current @ 14V4 (no signal): 0.92 A • Thermal protection consumption: < 1 mA • Battery ground vs secondary ground decoupling: 1 KOhm • Body ground vs battery ground decoupling: 0 Ohm • Bandwidth (-3dB ÷ 1 Watt): < 10 Hz ÷ 40 KHz • S/N ratio (AP filter 10 Hz - 500 KHz ) – Power rating ref: 29 dB • S/N ratio (AP filter 10 Hz - 22 KHz ) – Power rating ref: 44 dB (“A” weighted) • Eq. Input noise (AP filter 10 Hz - 500 KHz ): 11,7 mV • Eq. Input noise (AP filter 10 Hz - 22 KHz ): 2 mV (“A” weighted) • Channel separation@ 100Hz / 1KHz / 10KHz – 10 Watt ref: 57 / 59 / 54 (dB) • Crossover: HP (CH1/2) / HP or LP (CH3/4) [80Hz – 12dB/oct] • Thermal cutoff Threshold: 82 °C (±5°C) • Recovery Temperature Threshold: 72 °C (±5°C) • Load drive limitations (*): 2 Ohm / 4 Ohm (SE / BTL) • Suggested fuse: 30 A (onboard)

Write a Review

Frequently compared

Match the numbers to your setup

The specs above are the fastest way to confirm a part is right before checkout — a size or power rating just outside your factory setup usually means an adapter or a different SKU, not a return later. If you are not sure which spec matters for your vehicle, the fit tool at the top of the page narrows the catalog to parts already confirmed for your year, make, and model.

!