Skip to main content

Find audio gear that fits your vehicle

JL Audio XDM600/6 — 6-channel Class D amplifier

JL Audio XDM600/6 — 6-channel Class D amplifier

JL Audio

In stock

$829.99

Highlights

  • Impedance 2 ohm
  • RMS Power 75W
  • Sensitivity 12 dB
SKU:
XDM600/6
Adding to cart… The item has been added

Every order includes

  • A vehicle-specific install guide
  • Free lifetime tech support
  • The harness or adapter your vehicle needs, listed in the fit box above
  • 60-day returns

Questions? Talk to a Velocity advisor

3435434534

Specifications

Specifications

Impedance
2 ohm
RMS Power
75W
Sensitivity
12 dB
Amplifier Channels
6
Amplifier Class
Class D

About the JL Audio XDM600/6 — 6-channel Class D amplifier

From the manufacturer

JL Audio XDM600/6 6-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4V The incredibly flexible XDM600/6 packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency. Suitable for car or boat installations, the XDM600/6 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. With the XDM600/6, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2. The XDM600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit. Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 75 W RMS x 6 @ 2 Ω 100 W RMS x 6 Bridged @ 4Ω 200 W RMS x 3 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 60 W RMS x 6 @ 2 Ω 90 W RMS x 6 Bridged @ 4Ω 180 W RMS x 3 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 10.23 in / 260 mm Depth (D) 7.09 in / 180 mm Net Weight 5.8 lb / 2.63 kg

Write a Review

Frequently compared

Match the numbers to your setup

The specs above are the fastest way to confirm a part is right before checkout — a size or power rating just outside your factory setup usually means an adapter or a different SKU, not a return later. If you are not sure which spec matters for your vehicle, the fit tool at the top of the page narrows the catalog to parts already confirmed for your year, make, and model.

!