Skip to main content

Find audio gear that fits your vehicle

JL Audio TwK-88 System Tuning DSP: 8 Inputs/8 Outputs+Digital in/out

JL Audio TwK-88 System Tuning DSP: 8 Inputs/8 Outputs+Digital in/out

JL Audio

In stock

$579.99

Highlights

  • Sensitivity 48 dB
SKU:
TwK-88
Adding to cart… The item has been added

Every order includes

  • A vehicle-specific install guide
  • Free lifetime tech support
  • The harness or adapter your vehicle needs, listed in the fit box above
  • 60-day returns

Questions? Talk to a Velocity advisor

3435434534

Specifications

Specifications

Sensitivity
48 dB

About the JL Audio TwK-88 System Tuning DSP: 8 Inputs/8 Outputs+Digital in/out

From the manufacturer

JL Audio TwK-88 System Tuning DSP with 8-ch. Stereo RCA Inputs / 2 Digital (Optical and Coaxial) Inputs / 8-ch. Stereo RCA Outputs / 1 Digital Optical Output The TwK™ 88 is a state-of-the-art digital signal processor engineered to deliver world-class system tuning capabilities in an easy-to-use format. Equipped with an advanced 24-bit DSP processor, the TwK™ 88 includes flexible input/output options, 80 total bands of equalization and powerful mixing tools. The included DRC-200 Digital Remote Controller offers dual level controls, toggles up to six presets, and has an LED indicator. Control the TwK™ 88’s entire feature set by connecting it to your PC via USB, using the companion TüN™ 2.0 Software interface. Flexible input design with 8 differential-balanced, line-level analog inputs (RCA), accepting line-level signals up to 7.1V (RMS) Separate optical (Toslink) and coaxial digital inputs for connection to digital S/PDIF sources. Flexible input mixer allows input channels to be combined with full control over each input’s level and polarity. 8 banks of 10-band graphic or parametric equalizers with configurable EQ assignment Powerful crossover section with fully variable, high-pass and low-pass filters, crossover slopes are selectable from 6 dB/octave to 48 dB/octave (in 6 dB/octave increments) Configurable polarity and delay settings, with separate entries for speaker distance plus offset control; fully linkable with other channels, in any combination, for adjustment Precise output level controls, adjustable in 0.5 or 0.1 dB increments, fully linkable with other channels, in any combination 8 analog, line-level RCA output jacks (4V RMS) Optical (Toslink) output jack provides a pass-through digital audio (S/PDIF) signal from any pair of input channels, with no signal processing applied. Remote turn-on output (+12VDC) for activating aftermarket audio equipment. JLid™ Port allows connection of the included DRC-200 Digital Remote Controller to add dual configurable level controls, preset selection and LED status reporting from the driver's seat. General Specifications Power Supply Type Regulated DC-DC SMPS Input Operating Voltage 10 - 16 VDC Standby Current Draw <1.5 mA Operating Current Draw 0.7 A Recommended Fuse Value 1 A Input Channels Eight Input Type Line-level, Differential-Balanced Input Voltage Range 250 mV - 7.1 V RMS Minimum Input Voltage 10 mV RMS Input Level Setting Eleven discrete selections from 250 mV - 7.1V RMS Output Channels Eight Analog Output Unbalanced, stereo RCA jacks Digital Output Optical (Toslink) output (S/PDIF) Output Impedance 450 Ω Latency Analog - Analog: 5.425 mS Analog - Optical: 5.470 mS Optical - Optical: 4.860 mS Optical - Analog: 4.805 mS S/N Ratio 98 dB (A-Weighted, referred to 4V RMS Output) THD+N @ Rated Output 0.02% (20 Hz - 20 kHz) Signal Processing Audio Resolution 24 bit / 48 kHz Number of EQ Bands 10 x 8 Channels Remote Level Control Included (DRC-200) Remote Level Functions Master Volume Control + Trim; Master Volume Control + Fader; Zone Control, LED Status Reporting Physical Specifications Height (H) 1.85 in / 47 mm Width (W) 4.29 in / 109 mm Depth (D) 6.14 in / 156 mm Net Weight 2.58 lb / 1.17 kg

Write a Review

Frequently compared

Match the numbers to your setup

The specs above are the fastest way to confirm a part is right before checkout — a size or power rating just outside your factory setup usually means an adapter or a different SKU, not a return later. If you are not sure which spec matters for your vehicle, the fit tool at the top of the page narrows the catalog to parts already confirmed for your year, make, and model.

!