Skip to main content

Find audio gear that fits your vehicle

JL Audio RD900/5+ RD car 5-channel system amplifier (900 watts)

JL Audio RD900/5+ RD car 5-channel system amplifier (900 watts)

JL Audio

In stock

$749.99

Highlights

  • Impedance 2 ohm
  • Sensitivity 104 dB
  • Amplifier Channels 5
SKU:
RD900/5+
Adding to cart… The item has been added

Every order includes

  • A vehicle-specific install guide
  • Free lifetime tech support
  • The harness or adapter your vehicle needs, listed in the fit box above
  • 60-day returns

Questions? Talk to a Velocity advisor

3435434534

Specifications

Specifications

Impedance
2 ohm
Sensitivity
104 dB
Amplifier Channels
5
Amplifier Class
Class D

About the JL Audio RD900/5+ RD car 5-channel system amplifier (900 watts)

From the manufacturer

Included in this kit JL Audio RD900/5+ RD car 5-channel system amplifier (900 watts) SLEEK, POWERFUL, PACKED WITH VALUE The look is amazing, and the performance backs it up. Designed as a total “one-box solution,” this RD series amplifier from JL Audio can comfortably drive a complete 4-satellite speaker system plus a subwoofer — all with a robust 900 watts of power. EFFICIENT CLASS-D DESIGN Small size, minimal heat and lots of power — Class-D amplifier design offers significant advantages. And our NexD™ switching technology adds even more, using enhanced pulse width modulation techniques to boost the amplifier’s bandwidth while minimizing distortion and improving efficiency. CLEAN, POWERFUL, RELIABLE Churning out 900 watts of total power — 100 watts from each of its 4 channels into a 2-ohm load (14.4 volts, 1% THD) plus a robust 500 watts for a subwoofer — this RD series amp brings stunning output to your audio system. Each pair of main channels is also fully bridgeable, enabling an ultrapowerful 3-channel amplifier setup. STUDIO-GRADE SIGNAL PROCESSING Each of the amplifier’s main channels is equipped with a 12-decibel/octave high-pass filter, with an additional band-pass filter on its rear channels and a dedicated low-pass filter for the subwoofer channel. All 3 crossovers offer continuously variable frequency selection from 50–500 Hz for precise filtering. LED CLIPPING INDICATOR RINGS An LED clipping indicator light on the control panel lets you quickly set your amplifier’s input sensitivity, without the need for additional test equipment. EASY CONNECTIVITY With “input type” switches on the stereo channel sections, RD series amps can eliminate the need for Y-adapters when bridging stereo output channels. BAND-PASS CROSSOVER When used as a system amplifier, the band-pass crossover feature enables a two-way active configuration. Specifications: General Channels: 5 Physical dimensions (Height): 2.13" (54 mm) Physical dimensions (Width): 14.66" (372 mm) Physical dimensions (Depth): 6.96" (177 mm) Weight: 7.15 lbs (3.6 kg) Operating voltage: 10-15 VDC Operating temperature range: –4º to 149º F (–20º to 65º C) Warranty: 2 years Audio Amplifier class: Class D Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) Main: 70 W x 4 Sub: 225 W x 1 Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) Main: 100 W x 4 Sub: 500 W x 1 Rated continuous (RMS) power (12.5 V input @ 4 Ohm < 1% THD) Main: 60 W x 4 Sub: 200 W x 1 Rated continuous (RMS) power (12.5 V input @ 2 Ohm < 1% THD) Main: 90 W x 4 Sub: 350 W x 1 Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Main Channels: >104 dB Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Subwoofer Channel: >103 dB Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Main Channels: >84 dB Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Subwoofer Channel: >83 dB Damping factor @ 4 Ω: >150/50 Hz Damping factor @ 2 Ω: >75/50 Hz THD+N @ Rated Power: Main Channels:

Write a Review

Frequently compared

Match the numbers to your setup

The specs above are the fastest way to confirm a part is right before checkout — a size or power rating just outside your factory setup usually means an adapter or a different SKU, not a return later. If you are not sure which spec matters for your vehicle, the fit tool at the top of the page narrows the catalog to parts already confirmed for your year, make, and model.

!